NISSAN S-13 S-14 CJR Rywire Custom 2JZ Engine Harness for AEM Infinity
First we start with a Rywire 2JZ Engine Harness made with multi-colored Tefzel wire and Raychem heatshrink. We match it with an AEM Infinity ECU and components to make the most cost effective Engine Control System on the market.
Rywire builds this harness using Mil-Spec Teflon coated wire with a maximum heat rating of 200°C . The Teflon coated wire is loomed with The highest quality Raychem DR-25 heat shrink covering, and adhesive lined wire junctions to keep moisture out.
Each connector is crimped with pneumatic heads to ensure an OEM crimp every time, then tagged with a yellow identification labels for easy installation. All heavy interference circuits are protected and grounded with proper wire covering.
All connectors and materials are new. Each connector is crimped with pneumatic heads to ensure an OEM crimp every time, then tagged with a white identification label for easy installation. All heavy interference circuits are protected and grounded with proper wire covering. Our engine harnesses are 100% quality tested pin to pin; And resistance checked to ensure no voltage fluctuations.
Chassis adapter options
This harness can plug and play into any chassis, but we recommend our CJR Rywire stand-alone fuse box. This fuse box allows for a quick and easy install into any race car.
This harness with the Fuse/relay box is also plug and play with our 6-SWITCH PANEL.
The engine harness, fuse/relay box, and switch panel are all PLUG AND PLAY making your life much easier!
MADE IN THE U.S.A.
ECU AEM Infinity 506 (AEM Part 30-7106)
Lambda / Uego Bosch 4.2LSU Wideband O2 sensor
Fuel Pressure AEM (AEM Part 30-2130-100)
Oil Pressure AEM (AEM Part 30-2130-150)
Manifold Pressure (MAP) AEM (AEM Part 30-2130-50 or 30-2130-75)
Throttle Position (TPS) Factory Toyota 2JZ
Idle Air Control (IAC) Factory Toyota 2JZ
Intake Air Temperature (IAT) AEM (AEM Part AEM-30-2010)
Coolant Sensor (ECT) Factory Toyota 2JZ
H20 (To gauge cluster) Factory Toyota 2JZ
VVTI Can be added to harness through the spare connector
Speed Sensor (VSS) Factory Toyota 2JZ
Reverse Switch Factory Toyota 2JZ
Starter Trigger Factory Toyota 2JZ
Ignition Coil Driver Factory Toyota 2JZ
Ignition Coils 1-6 Sequential Toyota 2JZ
Ground Ring Terminal
Knock Sensors (KS) Factory Toyota 2JZ
Alternator (ALT) Factory Toyota 2JZ
Injectors (6 Injectors Only) Denso/Factory Toyota 2JZ (We recommend Injector Dynamics ID 2000)
Boost Solenoid (MAC solenoid) Rywire (Rywire 3 port or 4 port kit)
FLEX FUEL capable via AUX expansion Rywire (Rywire flex fuel kit )
Auxiliary Expansion (Spare) 8 Pin Deutsch Connector - Engine Side
Auxiliary Expansion (Spare) 6 Pin Deutsch Connector - Cabin Side
Cam and Crank OEM Toyota 2JZ Hall Sensor compatible
CAN BUS connectivity AEM NET (connects devices such as loggers, dashes, and gauges)
Chassis Integration Connector 20 Pin
This is only the custom wiring harness. See our AEM Infinity line for the ECU and sensors that match this harness.